Question:

How do I change the Civil AccuDraw X, Y operation to Northing, Easting?

Answer:

Go to Settings > Design File

Civil Formatting > Coordinate Settings and change Format to Northing, Easting. Click OK.

Go to Tools > Civil AccuDraw > Civil AccuDraw Settings.

Under the Favorites tab click Add and enter a name such as "NE". Set Ordinate 1 to Northing and Ordinate 2 to Easting.

Select the newly customized Civil AccuDraw command.

Problem Description: Can't find the download link for Bentley Subsurface Utility Engineering (SUE)

Solution: Subsurface Utility Engineering (SUE) is built in MXRoad, InRoads & Geopak. To activate SUE, on the MicroStation menu go to Tools > Product Add-Ins > Activate Subsurface Utility Engineering.

For more information:  It requires a separate license from MXRoad, InRoads & Geopak therefore it will need to be activated before use.

Note: Bentley Subsurface Utility Engineering comes with MicroStation platform it's not an additional installation.

Question:

We run a Virtual Desktop Infrastructure via Citrix XenApp. We installed in latest Virtual Delivery Agent on our machines and now neither PowerCivil nor InRoads will run. The program launches we click a map it starts to load then crashes and says report error.

Solution:

Please refer to Requirements>Installation Requirement>Virtualized Environments section of the Readme filed delivered with the product.  Citrix XenApp support has not been implemented in this release.

Problem:

When I select the InRoads icon to load the product, MicroStation loads as expected but the InRoads program never opens.  The splashscreen doesn't appear, and the InRoads explorer is never opened.

Solution:

This can happen when certain products (i.e. CloudWorx, iPlot, etc.) are installed on the machine, which somehow prevents other applications from loading through the MDL Applications.  We can define a variable value for the MS_DGNAPPS to force MicroStation to keep loading apps and not stop before it can load the InRoads app. To edit this variable, you will need access to edit the MS_DGNAPPS variable:

Go in MicroStation to Workspace > Configuration and edit the MS_DGNAPPS config. Set the mode to prepend, and add the following variable:

$(BSI_CIVIL_APP)

Save the Configuration, close MicroStation and reload InRoads to see if it will load after MicroStation is loaded. It should automatically bring up that InRoads splashscreen and then load the application.

Question:

I have a very large surface that processes very slowly.  Is there anything I can do to improve processing speed?

Answer:

The following solutions may improve processing speeds in InRoads/MicroStation:

• If the mapping for the project is very dense you might have some latitude to thin the model.  If using InRoads 8.7+, there is an Application Add-In called Thin Random Points. It will appear under Surface > Utilities. This command is much faster than the normal thinning routine and it was developed for Lidar data. The Help has an explanation of the methodology used.
  
  
• Go to Surface > Surface Properties and see how many deleted points are in the model.  You may need to run the Surface > Utilities > Compress Surface command to remove these deleted feature points to reduce the size of the DTM.
  
  
• Copy portions of the large surface into separate DTM surfaces using the Copy Portion of Surface command.  This will allow you to work in a designated area for a project that may be confined to a small area within a larger surveyed / laser scanned surface, greatly reducing the amount of information that is required to be opened in InRoads to perform your design tasks.
  
  
• Another possibility is to increase the virtual memory on the machine.  Use your Task Manager and set the column view to include/show the Virtual Memory Size.  If the physical memory used exceeds the virtual memory size, there are processes in Windows which can be performed to increase the virtual memory.  The following workflow is provide by MicroSoft:
  http://windows.microsoft.com/en-us/windows/change-virtual-memory-size#1TC=windows-7

• Please review the following wiki for additional suggestions on improving processing speeds: http://communities.bentley.com/products/microstation/w/microstation__wiki/2360.microstation-memory-management

Question:

After upgrading to ProjectWise CONNECT edition, user opens GEOPAK SS2 and gets the following error when trying to load a TIN file: “Error Opening Tin File pw:\....”

Answer:

Since GEOPAK SS2 was released years before ProjectWise CONNECT, it did not know the proper registry keys to look for to resolve ProjectWise CONNECT file locations.

Therefore, after a user upgrades to ProjectWise CONNECT, it is necessary to re-direct the old registry keys to the new CONNECT registry locations. A program can be downloaded from the following location that will update the registry keys to point to the correct location.

http://communities.bentley.com/products/road___site_design/m/road_and_site_design_gallery/272500/download

To run:

1.) Download and extract the file “reglnk.exe” from the link above
2.) Right-click on the exe and select “Run as administrator” on any machine that is showing the problem.

Problem:

When opening InRoads and loading the preferences *.XIN file, the list which should contain the names of saved preferences for InRoads commands is completely blank.  After checking the Style manager, Template Manager, and XML Reports, they are also all blank and no information is populating. 

Solution:

There are certain files required on the machine to read XML files correctly.  InRoads requires Internet Explorer 6.0+ as well as a specific pair of MSXML DLL files.  Without these DLL files, the program will not be able to read and format the XML information correctly from the file.  These MSXML files are located at C:\\Windows\system32 and are titled MSXML4.DLL and MSXML6.DLL.  If one or both of these files do not exist, the results could be blank commands due to the program not formatting the information from the XIN, XML, or ITL files.  If you are experiencing this type of behavior, it may be required to delete the DLL files and download them from the Microsoft website.  They could be deleted or changed with a system update or a Windows update and be required to download these necessary files. Here is a link to the downloads for these particular MSXML files on the Microsoft downloads page.

4.0 Download  -  http://www.microsoft.com/download/en/details.aspx?id=15697

6.0 Download  -  http://www.microsoft.com/download/en/details.aspx?id=3988

Question:

When I publish an i-model from MicroStation CONNECT v10.04.00.46, and then open the i-model in OpenRoads Navigator CONNECT, I get one of the following error messages:

“Unable to open file”

“The i-model you are trying to open is not supported by this version of Navigator. Use MicroStation CONNECT Edition Update 3 or a newer version of your publishing application to republish the i-model.”

Why is this, and how do I fix it?

Answer:

MicroStation CONNECT comes with a newer DgnDb i-model Importer, v01.05.08xxx.x, that creates a 0601 i-model. OpenRoads Navigator will only read 0505 i-models that are created from a previous DgnDb i-model Importer v01.05.07.xxx.x.

To be able to open an i-model in OpenRoads Navigator CONNECT v10.00.01.39:

1. Uninstall the Bentley DgnDb i-model Importer 1.5 x64 (it is version 01.05.08xxx.x)
2. Download the previous version, ItgDgnDbImporter1-5-7-9_x64.zip, here:
3. Install the previous version by launching, ItgDgnDbImporter_x64.msi.
4. Create another i-model within MicroStation CONNECT.
5. Open the i-model in OpenRoads Navigator CONNECT.

Question:

What variable within the msconfig.cfg file defines the location of the prefs folder that contains the civil preferences and commands?

Answer:

_USTN_HOMEROOT

Question:

When I try to load a .fwd file, I get this error: Bad file (.tiw File) opened. Perhaps an I/O error!. What is causing this?

Answer:

.fwd files point to a .tiw file to import your points. This message means the tiw file is not in the correct location. Copy the tiw to the correct location. The default location is C:\ProgramData\Bentley\Civil\SurveyTools\8.11.9\en\Data

Question:

When I go to uninstall the software, I get error 2753, The file is not marked for installation. How can I fix this error, so that I can uninstall the software?

Answer:

This error is typically due to trying to uninstall a software that has been partially installed. Users in the past have resolved this error by doing the following:

1. Repair the .Net Framework: https://www.microsoft.com/en-us/download/details.aspx?id=30135
2. Run ccleaner to clean the registry
3. Run this tool to uninstall the software: https://support.microsoft.com/en-us/help/17588/fix-problems-that-block-programs-from-being-installed-or-removed
4. Before reinstalling the software, make sure the User Access Control (UAC) is turned all the way down.

The following resources are provided as a reference by Bentley's Technical Support Group. 

Video Clips

Creating and Editing Utilities

• Video: Create New Utility Nodes and Conduits
• Video: Create Utility From 3D Graphic Source
• Video: Extract Utility By Graphic Command Using Selection Method
• Video: Extract Utility From Graphics using Filters
• Video: Import Drainage Project From InRoads S&S, GEOPAK Drainage or MX Drainage
• Video: Synchronise data with GIS using ModelBuilder
• Video: Overview of Models and Manipulators for a node
• Video: Overview of Utility Editing Operations
• Video: Display a pipe run in a Profile view
• Video: How to use Auto Create Profile Run tool
• Video: How to Create a "Network" in SUDA

Workflows

• Video: Create a 3D Linestring from a conduit
• Video: Conflict Detection
• Video: Model a Proposed Waterline and Trench
• Video: Design a Cross-Drain and Channel
• Video: Design a Detention Pond
• Video: Design the Profile for a Short Duct, relative to a Terrain Model
• Video: Design the Profile for a Longer Duct, relative to a Terrain Model
• Video: Enable Trenching option for Conduit
• Video: Placing an open channel
• Video: Use Civil Accudraw to Place Drainage Node

Cells and Feature Definitions

• Video: Creating Cells for a chamber
• Video: Creating Cells for a headwall
• Video: Creating a Feature Definition for a node
• Video: Creating a Feature Definition for a conduit
• Video: Creating a Feature Definition for an open channel
• Video: Creating a Feature Definition for a pipe end

Hydraulics and Hydrology

• Video: Creating Storm Data to use in the United Kingdom

 

For more on Bentley's Hydraulics and Hydrology functionality, visit: 

• Hydraulics and Hydrology Wiki

 

TechNotes

• Subsurface Utilities Learning Path

This video demonstrates how to use Civil Accudraw in conjunction with the Place Node command in Subsurface Utility Design and Analysis (SUDA).

Click the video below to play it. To view in fullscreen mode, first click the YouTube link at the bottom of the video to launch the video on the YouTube site. Then, click the fullscreen button (rightmost button at bottom of video).

 Recorded in 1920 X 1080 resolution. 

(Please visit the site to view this video)

SIGN UP for Future OpenRoads SIG Meetings

VIEWPast OpenRoads SIG Meetings

Questions and Answers

February 2017 - Purposeful Design and Why You Need Civil AccuDraw

Question: I have never used Civil AccuDraw. Is there an introduction to get me started using this tool?
Answer: http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/17927.video-introduction-to-civil-accudraw

Question: How do I change the X,Y operation to N,E?
Answer: http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/32811.how-to-change-the-civil-accudraw-x-y-operation-to-northing-easting

Question: How do you rotate the compass in Civil AccuDraw?
Answer: http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/15409.video-quick-tip-on-rotating-the-compass-in-civil-accudraw<

Question: Sometimes when using Civil Accudraw, it does not respond when I key-in "O" to set the reference element. Why is this?
Answer: When keying on the "o" be sure your cursor is in a field of the Civil Accudraw heads-up prompt. Also, depending on what you’re doing, the focus may be in the "geometry" prompt vs. the Civil AccuDraw prompt. You can TAB to move between fields before keying in "o".

January 2017 - Working Effectively in the Modeling Environment

Question: When should I use a 2D or a 3D DGN?
Answer: Use a 2D DGN for geometry and corridors, use a 3D DGN for survey, topography, and terrains.

Question: What are some best practices for file organization within OpenRoads?
Answer: https://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/28222.video-best-practices-for-project-file-organization-in-openroads

Question: When is the Default-3D model created in a 2D DGN?
Answer: The 3D model is created upon invoking an element or function that requires elevation. For example, when you activate a terrain or a profile. You cannot delete the Default-3D model once it is created.

Question: How should I reference my 2D and 3D DGNs?
Answer: For OpenRoads models, attach the 2D default model to the 2D model, and let OpenRoads manage the 3D model. When referencing 3D models from other sources, attach them to the OpenRoads 3D model.

Question: What happens if you start a project in a 3D seed file and create an alignment?
Answer: If you place geometry in a 3D DGN, the 2D and 3D instances are in the same model. It makes picking difficult, but it will work. Best practice is to create the civil model from a 2D seed file.

Question: Can a corridor design be done in a blank DGN with the 2D alignment DGN referenced?
Answer: Yes, the geometry can be in a referenced model.

Question: Can you reference the profiles into sheets afterwards?
Answer: Profiles referenced into sheets will be in OpenRoads Designer

Question: Does referencing work with ProjectWise?
Answer: Yes

Question: How do you target non-civil objects for end conditions?
Answer: You can target MicroStation meshes by featurizing. MicroStation lines/chains can be targeted directly, but it is recommended to featurize them. It also is beneficial because a name of the element exists and is easier to track.

December 2016 - Where in the World? Geospatially Locating Your Project

Question: What is the difference between the two Attachment Methods, Geographic – Reprojected and Coincident World?
Answer: Geographic – Reprojected, takes account of rotation and scaling between the two coordinate systems by recalculating the points in the reference model to align with corresponding latitude/longitude points in the active model. Coincident World simply lines up the 0,0 (Global Origin) and design plane.

Question: What is a sister file?
Answer: A sister file is usually a text file listing coordinates of at least two corners of a raster image that are used to scale the image. A sister file is needed if the raster image does not include location data within the file.

Question: Can I create/define a local coordinate system that will interact with other coordinate systems?
Answer: Yes, the functionality to setup coordinate systems is included in the Bentley Map software.

Question: Where can I access more training on geo-coordination?
Answer: https://learn.bentley.com/app/Public/ViewLearningPathDetails?lpId=106515&callFrom=MyLp

November 2016 - Put Your Stamp on it! Modeling Design Intent with Civil Cells in OpenRoads

Question: How do I modify a delivered civil cell?
Answer: http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/21998.video-modify-a-delivered-civil-cell

Question: How do I create a driveway civil cell?
Answer:http://learn.bentley.com/app/Public/ViewLearningPathWithMasterCourseExpanded?lpId=106084&mcId=102296

Question: What are some best practices for creating civil cells?
Answer:http://learn.bentley.com/app/Public/ViewLearningPathWithMasterCourseExpanded?lpId=106084&mcId=101475

Question: Where can I find introductory training on creating civil cells?
Answer:http://learn.bentley.com/app/Public/ViewLearningPathWithMasterCourseExpanded?lpId=106084&mcId=102295

October 2016 - OpenRoads Templates - Tips, Tricks, and Traps

Question: Where can I find more info on creating more templates?
Answer: http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/7045.corridor-modeling-openroads
http://learn.bentley.com/app/Public/ViewLearningPathDetails?lpId=104644

Question: How do I create a surface that follows the top of my template?
Answer: http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/7031

Question: How do you share template you have created?
Answer: Go to Tools>Template Library Organizer. Typically there is a core library that contains your standards, then there is a project library where you can edit standards to be project specific. Select the template library organizer, and you can open both of the libraries and copy templates back and forth

Question: When editing the template, how do you enter the ground slope? We want 3%, but when I type in 3 I get 300.
Answer: To get 3% you must enter either 0.03 or 3% or a ratio 3/100, not 3.

May 2016 - OpenRoads ConceptStation

Question: Does ConceptStation have the ability to model retaining walls, curb & gutter, etc.?
Answer: The roadways and bridges are template-based and can contain curb\gutter walls, etc.

Question: Is ConceptStation CPU based or GPU like LumenRT?
Answer: ConceptStation is GPU based. Therefore performance is relative to the quality of the video that is installed. ConceptStation requires a minimum 2G video card.

Question: Can you export data to OpenRoads?
Answer:http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/27777.video-openroads-conceptstation-exporting-data-to-openroads

Question: Can you export images and videos of the concepts?
Answer: You can export images and create videos. ConceptStation includes the LumenRT visualization tools to easily create videos.

Question: Can you create/edit your own templates?
Answer: Yes, templates are completely configurable.

Question: Can you import DTM, ALG, and IRD data into ConceptStation?
Answer: You can directly import DTMs and ALGs. The IRD file is not supported at this time.

Question: How do I get Concept Station?
Answer: Concept Station is available for download from the software fulfillment center at http://select.bentley.com/FulfillmentCenter

Question: Which superelevation standards does ConceptStation use?
Answer: Superelevation in ConceptStation is based on the AASHTO standards.

April 2016 - Putting the Pieces Together: Creating Composite Models in OpenRoads

Question:  Should I create a terrain model from corridor mesh elements or 3D features?
Answer:http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/28219.create-terrain-model-from-corridor-features-or-mesh

Question: Can you change your ditch flowline from within the dynamic cross section window?
Answer: At present time, edits to geometry cannot be made in dynamic cross sections.

March 2016 –ContextCapture - A 3D Photo is Worth a Thousand Words and More!

Question: What sort of camera is recommended for use with ContextCapture?
Answer:http://communities.bentley.com/products/3d_imaging_and_point_cloud_software/w/wiki/27132.camera-recommendation-for-contextcapture

Question: How do you delete out items such as trees from a mesh that was created in ContextCapture to prevent models from targeting them?
Answer: If you output the 3D data as a point cloud, you can use point cloud classification to filter the data.

Question: Does ContextCapture work inside a building?
Answer: http://communities.bentley.com/products/3d_imaging_and_point_cloud_software/w/wiki/27133.interior-use-of-contextcapture

Question: What are the hardware requirements?
Answer:http://communities.bentley.com/products/3d_imaging_and_point_cloud_software/w/wiki/26310.what-are-the-minimum-recommended-system-requirements-for-contextcapture

Question: Can you use the zoom function on a camera?
Answer:http://communities.bentley.com/products/3d_imaging_and_point_cloud_software/w/wiki/27134.use-of-camera-zoom-in-contextcapture

Question: How well does ContextCapture work with a combination of cameras, i.e. a combination of drone images and hand held camera images?
Answer: http://communities.bentley.com/products/3d_imaging_and_point_cloud_software/w/wiki/27135.multiple-camera-use-in-contextcapture

Question: What is the difference between Tie Points and Control Points?
Answer:http://communities.bentley.com/products/3d_imaging_and_point_cloud_software/w/wiki/27136.contextcapture-difference-between-tie-points-and-control-points

Question: Can you combine the photo mesh with a topo survey to create a more accurate mesh?
Answer: http://communities.bentley.com/products/3d_imaging_and_point_cloud_software/w/wiki/27137.contextcapture-combination-of-survey-data-and-photos

Question: Can you cut and store sections?
Answer: Yes – Use the Section Tools available with Descartes.

Question: How do you create a control point?
Answer:http://communities.bentley.com/products/3d_imaging_and_point_cloud_software/w/wiki/27138.contextcapture-create-control-point

Question: Can point cloud sections follow an alignment?
Answer:http://communities.bentley.com/products/3d_imaging_and_point_cloud_software/w/wiki/27142.create-cross-sections-along-an-alignment

Question: Does ContextCapture work on smooth surfaces like a white wall?
Answer:http://communities.bentley.com/products/3d_imaging_and_point_cloud_software/w/wiki/27139.smooth-surfaces-in-contextcapture

Question: Can you use frames from a video?
Answer:http://communities.bentley.com/products/3d_imaging_and_point_cloud_software/w/wiki/27140.use-of-videos-in-contextcapture

Question: Is Descartes required? What functions are lost if you don’t have Descartes?
Answer: Descartes isn't required. Drawing and snapping to the points can be done in MicroStation; however, Descartes contains tools that make working in the point cloud easier. Descartes allows you to snap and draw more efficiently, classify the points, cut sections, etc. from the point cloud.

Question: Can supplemental photos be added later to update already-processed data or does the entire data set needed to be reprocessed?
Answer:http://communities.bentley.com/products/3d_imaging_and_point_cloud_software/w/wiki/27141.contextcapture-add-additional-photos

Question: Are there limits to rounding of the lens (for example, a GoPro might have a really wide angle)?
Answer: No, there are no limits, and ContextCapture does support GoPro.

Question: When using ContextCapture, will the GPU effect the quality or just the length of time to process?
Answer: The GPU does not affect the quality, just the processing time.

February 2016 - The OpenRoads Workspace

Question: When using imperial files, does Bentley now have the ability to use US Survey Foot?
Answer:http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/26923.survey-foot-units-in-ss4

Question: How do I use my previously created XIN/DDB files to build my OpenRoads standards?
Answer: http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/7051
              http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/7025

Question: Will my template library be included in my DGNLIB?
Answer: The Template Library (.itl) exists independently outside a DGNLIB.

Question: How do I migrate component styles from SS2 to OpenRoads?
Answer:https://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/19918.video-migrate-component-styles-from-ss2-to-openroads

Question: How do I import project settings and data from SS2 into OpenRoads?
Answer:http://learn.bentley.com/app/VideoPlayer/LinkToIndividualCourse?LearningPathID=108805&CourseId=111138&MediaID=5005147

Question: Will the new workspace "workset" examples delivered with OpenRoads CONNECT Edition?
Answer: Yes, we will deliver Workset/Workspaces OpenRoads CONNECT.

Question: What is the difference between civil cells and templates?
Answer:http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/26927.how-do-civil-cells-differ-from-templates

Question: Can we get a list of all OpenRoads configuration variables?
Answer:http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/26928.where-is-a-list-of-openroads-configuration-variables

Question: Are there any videos on roadway modeling using Inroads generated information?
Answer:http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/7045.corridor-modeling-openroads

January 2016 –Hitting the Target – Using and Managing End Conditions

Question: When should I use end conditions as opposed to point controls?
Answer: Point Controls are an excellent choice when you are able to define or already know the geometry needed. End Conditions are better to solve when some of this is unknown. Additionally, you can use end condition priorities to analyze alternatives in a specific order that makes engineering sense.

Question: Can you use target aliasing from Corridor A to B, and then at another location from B to A?
Answer:http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/26376.recursive-situations-in-target-aliasing

Question: What are the rules that govern how end conditions are solved at each template drop?
Answer:http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/25289.end-condition-rules

Question: How do I use end conditions to target an alignment?
Answer:http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/17904.video-corridor-references-end-condition-targets-alignment

Question: How do can I override an end condition using End Condition Exceptions and Point Controls?
Answer:http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/17906.video-targeting-with-end-condition-exceptions-and-point-controls

Question: How can I use target aliasing and corridor clipping to modify areas of overlap between multiple corridors?
Answer:http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/19151.video-target-aliasing-and-corridor-clipping

Question: When I initiate the Target Aliasing tool, I get a reminder to set the configuration variable, TARGET_ALIAS_ALLOW_ALL_LINEARS. What does this mean?
Answer:http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/23364.show-all-linear-targets-in-target-aliasing

Question: Does target aliasing work in similar fashion in GEOPAK?
Answer: Yes this technology exists in GEOPAK, InRoads and MX.

Question: I was wondering about using End Conditions in a corridor that passes through a zone that has multiple stratum.How can we use a different slope for every strata of the soil/existing terrain? Can OpenRoads calculate volumes of cut for every strata?
Answer: You can have targets that seek different surfaces. The cut volumes can be calculated using End Area Volumes.

• http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/16530.video-end-area-volumes-overview
• http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/16531.video-end-area-volumes-unsuitable-materials-exceptions-factors
• http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/16532.video-end-area-volumes-classifications

December 2015 - See What I Mean? Visually Communicating Your Design with LumenRT

Question: What are the suggested computer hardware requirements? (ie, video card, memory, processor)
Answer: The best results will be obtained with a high-quality gaming-style graphics card (2GB video memory on video card and 4GB or more of hard drive memory).

Question: Are there any limitations with model size or road length?
Answer: Any limitations would be based on your graphics card. There are no set limits when exporting from MicroStation Connect 64bit.

Question: Can you slice through the display to create a cross section?
Answer: Yes, you can generate cross sections.

Question: What kind of man-hour effort was required to develop this model or a similar model suitable for public presentation?
Answer: Once you go from the civil application into LumenRT, you can create a model in a few hours. Then you can immediately create screen captures. You can create a LiveCube in under an hour. Movies will take approximately 8 hours to render.

Question: What kind of resolution is available for images and videos? Can LumenRT produce HD quality?
Answer: HD is available and up to 4K video output.

Question: How do I obtain LumenRT?
Answer: LumenRT is part of ELS and is available on SELECTServices for download. A 7 day trial is available. See the following link for download and installation instructions: http://communities.bentley.com/products/microstation/microstation_visualization/w/microstation_visualization_wiki/25198.how-to-download-and-install-bentley-lumenrt

Question: Can LumenRT import VISSIM?
Answer: Yes, as long as you are in a 2D plane.

Question: Will lighting from street lights show up in LumenRT?
Answer: Yes, lighting can be handled externally. Interior lighting options are available as well.

Question: Where can I find LumenRT training?
Answer: http://learn.bentley.com/app/Public/BrowseLearningPaths?productlineId=26143&CustomLP=False

Question: Can LumenRT import SketchUp models?
Answer: Lumen does not import SketchUp models (skp files) directly.

November 2015 - Creating Civil Cells

Question: If you have created a civil cell with a driveway placed perpendicular to the mainline, can the driveway be at a skewed angle when you place the civil cell?
Answer: Yes - in fact this is demonstrated in the videos at this link: http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/7064

Question: Can the radius defined in a civil cell be edited after it is placed into your design?
Answer: Yes, the radius can be changed as needed after placing the civil cell. Edits to geometry within a civil cell are locally contained in the active DGN. The civil cell that is stored in the DGNLIB is not impacted.

Question: When clipping with a civil cell, does the clip affect the elements to be clipped in their whole depth, or does the civil cell only clip the layers which intersect with the depth of the cell?
Answer: http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/23252.depth-of-civil-cell-clipping

October 2015 - Working with the OpenRoads Navigator Mobile App

Question: When will OpenRoads Navigator Mobile App be available?
Answer: OpenRoads Navigator Mobile App is now in available in a Beta version running through the Apple Test Flight program. The target date for commercial iOS release is November 2015. The app will be available on Android later this year.

Question: Is there a possibility that the two different formats (i.dgn and .imodel) will merged to become the same format which can be opened both in desktop and on mobile?
Answer: Yes, the goal is to move everything to the .imodel.

Question: Will the documents such as PDF/Word/Excel that are linked in the DGN transfer to OpenRoads Navigator Mobile App?
Answer:http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/25168.attaching-documents-in-openroads-navigator

Question: Can you locate a point using GPS in the field?
Answer:http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/25169.locate-point-in-the-field

Question: How do you locate an issue on the screen?
Answer:http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/25170.locate-issue-on-screen

Question: How do you purchase OpenRoads Navigator Mobile App?
Answer: You can purchase a single passport for all mobile apps (ProjectWise Mobile, OpenRoads Navigator, etc).

Question: Can the coordinate information be displayed as Station-Offset?
Answer: Yes, as well as Lat-Long. If it is 3D, you will also get elevation.

Question: Which iOS devices will be supported?
Answer: Currently, iPad is the only supported Apple device. This is due to an Apple requirement that any iPhone app is supported on ALL version of iPhones.

Question: Can you use the station-offset feature with InRoads/GEOPAK files (.alg/.gpk)?
Answer:http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/25171.using-station-offset-tool-with-civil-data

Question: What is the file format that is exported from OpenRoads Navigator Mobile App?
Answer:http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/25172.openroads-navigator-file-format

Question: Can you reference the markup in a DGN?
Answer: Not in the current v8i version - this option will be available in the Connect edition.

September 2015 - Subsurface Utility Design and Analysis (SUDA)

Question: Are there any conflict management tools included in SUDA or is that only available in SUE?
Answer:http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/24021.availability-of-conflict-management-tools

Question: What is required if you need to design more than 100 inlets using StormCAD?
Answer:http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/24022.what-if-i-need-more-than-100-inlets-in-stormcad

Question: Is the 100 inlets limitation per drainage library, or is it the total number of allowed inlets within StormCAD?
Answer:http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/24023.is-the-stormcad-100-inlets-limitation-per-drainage-library

Question: Can I use the layout options without having a Subsurface Utility Engineering license?
Answer :http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/24024.can-i-use-layout-options-without-having-a-subsurface-utility-engineering-license

Question: Can nodes be placed as an offset to the alignment?
Answer : http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/24025.can-nodes-be-placed-as-an-offset-to-the-alignment

Question: Is it possible to design your own structures and feature definitions for use in SUDA/SUE?
Answer:http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/17693.video-creating-cells-to-use-in-sue-feature-definitions

Question: Does pipe connection direction matter?
Answer:http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/24026.pipe-connection-direction

Question: Can you assign multiple drainage areas to an inlet?
Answer:http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/24027.assign-multiple-drainage-areas-to-inlet

Question: How do you change the outflow for a catchment area?
Answer:http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/24028.change-catchment-outflow

Question: Can you assign multiple land uses within an area and calculate a composite c-value?
Answer:http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/24029.calculate-composite-c-value

Question: If you move a node, will the attached pipes move with the relocated structure?
Answer:http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/24030.do-pipes-adjust-when-nodes-are-relocated

Question: Can you have preloaded Scenarios to use for multiple projects?
Answer:http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/24032.where-are-scenarios-stored

Question: What formats are available for SUDA/SUE reports?
Answer:http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/24033.sudasue-report-formats

Question: Can you calculate c value with an impervious map like GEOPAK drainage?
Answer: That functionality is not currently available.

Question: Can conduits link to the center of the inlet instead of the walls of the inlets?
Answer:http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/24034.link-conduits-to-center-of-inlet

Question: Which of the OpenRoads products include StormCAD for OpenRoads 100 Inlets (part of Subsurface Utility Design and Analysis tools) at no extra fee?
Answer:http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/23051.which-products-include-stormcad-for-openroads-100-inlets-at-no-additional-fee

Question: Can you calculate on-grade spread? Can the spread section be read off of the surface?
Answer: That functionality is not currently available.

Question: When will Open Roads be tied into the Connect Edition of MicroStation?
Answer: The OpenRoads CONNECT edition (naming not confirmed) is currently in development. Look for an announcement soon regarding a target release date.

Question: What exactly are the SUDA/SUE structures?
Answer:http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/24036.what-are-sudasue-structures

Question: How do you change the runoff method?
Answer:http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/24037.change-runoff-method

Question: Can you import the cell libraries from GEOPAK drainage?
Answer:http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/24038.import-geopak-cell-libraries-in-suesuda

Question: When was SUDA introduced into the civil products?
Answer:http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/24035.when-was-suda-introduced-into-the-civil-products

August 2015 - Civil Cells

The data used in this month's session is from the LEARNserver class, Using Civil Cells In OpenRoads. This class can be accessed HERE.

Question: How are civil cell rules impacted when making manual adjustments to individual elements after placement?
Answer: http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/23241.where-are-manual-adjustments-to-civil-cells-stored

Question: Can two or more civil cells be merged? 
Answer: http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/23242.can-civil-cells-be-merged

Question: How do you determine quantities within a civil cell?
Answer:http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/23244.quantities-in-civil-cells

Question: Is there a recommended method for addressing overlaps when the end conditions targeting the existing DTM extend and overlap each other through a radius return?
Answer:http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/16056.video-overlapping-slopes-at-intersections-with-relatively-long-cutfill-slopes

Question: Is there a way to extract multiple lines with the Plan By 3D Element tool?
Answer:http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/23245.extract-multiple-lines-with-plan-by-3d-element

Question: What the best practice for creating superelevation through the civil cell?
Answer:http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/23246.how-to-add-superelevation-to-a-civil-cell

Question: Can you change the civil geometry stationing in a civil cell to match the direction of the corridor stationing?
Answer:http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/23247.transpose-stationing-in-civil-cell

Question: Why can't I create civil cell using elements that were created using Simple Arc From Element?
Answer:http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/23248.unable-to-create-civil-cell-using-simple-arc-from-element

Question: How you can remove a snap constraint?
Answer:http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/23249.remove-snap-constraint

Question: I receive a message that says "Cannot Select 3D Element" when I attempt to place my civil cell.
Answer:http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/23250.civil-cells-message-cannot-select-3d-element

Question: When clipping with a civil cell, does the clip affect the elements to be clipped in their whole depth, or does the civil cell only clip the layers which intersect with the depth of the cell?
Answer:http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/23252.depth-of-civil-cell-clipping

July 2015 - Using OpenRoads and Descartes to Maximize the Value of Point Clouds

Question: If I receive a point cloud that does not have classifications, can I edit the classifications in OpenRoads?
Answer: http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/22546.edit-classification-of-point-clouds

Question: Do I need a separate license for Descartes?
Answer: http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/17812.separate-license-for-subsurface-utility-engineering-sue-and-descartes

June 2015

Question: How do I set up my own Design Standards?
Answer: http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/14978.setting-up-design-standards-in-openroads

Question: How do I change the display of the handlers/manipulators in OpenRoads?
Answer: http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/14440.change-color-of-handlers-and-manipulators

Question: How do I open the Civil Message Center in OpenRoads?
Answer:http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/21883.open-civil-message-center

Question: How do I remove the design standards for a civil element?
Answer:http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/21885.remove-design-standards-from-element

Question: How can I customize civil accudraw settings? Where is the Offset-Offset option?
Answer: This video link provides an introduction to Civil Accudraw.  Skip to the 7:30 minute mark in the video for the answer to this specific question.
http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/17927.video-introduction-to-civil-accudraw

Question: How do I create a best fit alignment from survey data using OpenRoads Technology?
Answer:http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/21512.video-create-a-best-fit-alignment-from-survey-data

Question: How do you auto-annotate geometry in GEOPAK?
Answer:http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/7035.video-view-stationing-and-annotation-for-horizontal-geometry-geopak

May 2015 - Using Point Clouds with OpenRoads and Descartes

Question: Is there a way to turn off the display of point clouds from view without detaching them?
Answer: http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/21733.turn-off-display-of-point-clouds

Question: Can I use a scalable terrain model for OpenRoads design?
Answer: http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/21738.use-scalable-terrain-models-in-openroads

Question: Does Descartes require a separate license from InRoads/GEOPAK/MX?
Answer: http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/17812.separate-license-for-subsurface-utility-engineering-sue-and-descartes

Question: Can the templates in Descartes be used in OpenRoads?
Answer: http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/21739.use-descartes-templates-as-openroads-templates

April 2015 - Intersection Modeling (Part 2)

Question: How do I combine one or more terrain models?
Answer: http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/16944.combine-one-or-more-terrain-models

Question: How do I apply a linear template?
Answer: http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/7046.video-apply-linear-template-with-civil-cell-intersection

Question: What is the purpose of the check boxes next to the Feature Definitions in Project Explorer?
Answer:http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/20953.feature-definition-check-boxes

Question: How do you change the feature type of a terrain model element?  For example, I would like to change a breakline to a boundary element.
Answer:http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/20954.change-terrain-model-feature-type

Question: Can you use parametric constraints with linear templates?
Answer: http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/20955.parametric-constraints-in-linear-templates

Question: How do I remove the Lock in the heads-up display if I want to input a new value?
Answer:http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/20956.how-to-remove-the-lock-in-the-heads-up-display

Question: Can I merge a linear template into an existing terrain model?
Answer:http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/20958.merge-linear-template-into-terrain-model

March 2015- Intersection Modeling (Part 1)

Question: I have created horizontal geometry in 2D and have also created corresponding vertical geometry in profile view. Why isn't this feature being displayed in my 3D model?
Answer: http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/20029.feature-not-displayed-in-3d-model

Question: How can I create a profile to match the slope and elevation of adjoining profiles?
Answer: http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/20038.video-quick-profile-transition-tool

Question: I am trying to create a driveway profile and need to match the grade of the centerline alignment. How can this be done?
Answer: http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/17657.place-profile-intersection-point-tool

Question: If you have used the Profile Intersection Point tool to determine the location of a point in profile, will the profile update if the point of intersection is revised?
Answer: http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/20041.will-a-profile-update-if-the-profile-intersection-point-is-adjusted

Question: Is there a way to automatically create a profile as I am placing my horizontal geometry?
Answer: http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/15781.video-create-3d-automatically

February 2015 - SELECTseries 4 Update

Question: Where are the symbology, precision, and settings defined for the Inverse Points tool?
Answer: http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/19381.settings-for-inverse-points-tool

Question: I have created a Point Feature Station Offset Elevation Report, however the elevations are all blank. Why is this?
Answer: http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/19382.elevation-is-left-blank-in-point-feature-offset-elevation-report

Question: I have imported a Terrain Model from DTM, but I can not append extra data outside the boundary and the Terrain does not honor the Edge Method settings (Max Triangle Length/Slivers).
Answer: http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/19383.boundary-creating-problems-when-mergingmanipulating-terrain-model

Question: There are several components displayed in my cross section that I do not want considered in End Area Volumes. Is there a way that I can exclude them from the calculations?
Answer: http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/19385.ignore-components-in-end-area-volumes

Question: How do you import feature definitions in order to begin setting up standards for InRoads SS3/SS4?
Answer: http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/7025.video-how-to-import-feature-definitions-inroads

Question: What is the difference between the Profile By Slope From Element tool and the Profile By Variable Slope From Element tool?
Answer: http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/19386.difference-between-profile-by-slope-from-element-tool-and-profile-by-variable-slope-from-element-tool

Question: When opening a DGN file, I receive the following message: "Obsolete Civil Data Found..." Why am I receiving this message??
Answer: http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/16023.error-message-obsolete-civil-data-found

Question: When upgrading to SELECTseries 4, do DGNLIBs and seed files have to be upgraded to the new format in that same way that DGN files must be upgraded?
Answer: http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/19384.upgrading-dgnlib-seed-files-and-civil-cells-to-ss4

January 2015 - Where Do I Start?

Question: How do I update a Feature Definition from a DGNLIB that has been revised?
Answer: http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/18899.video-updating-feature-definitions-from-a-revised-dgnlib

Question: How do I change the Feature Definition from one "Type" to another?
Answer: http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/18900.change-type-of-feature-definition

Question: I do not have the Civil Standards, Civil Model, or Survey tabs in my Project Explorer, how can I turn them on?
Answer: http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/13077.unable-to-access-survey-civil-standards-or-civil-model-in-project-explorer

Question: Where do I sign up for the next OpenRoads SIG Meeting?
Answer: Access to the OpenRoads SIG meetings is managed through the Bentley Institute LEARNserver.  Below is a link to the Learning Path that contains past and future sessions:
http://learn.bentley.com/app/Public/ViewLearningPathDetails?lpId=107842

Question: I have additional questions/problems that were not addressed during the last meeting.  Where can I send those questions to be addressed?
Answer: The best place to search for answers and post new questions is on the Bentley Communities Forums and Support Solution WIKI pages.

Forums:
https://communities.bentley.com/products/road___site_design/f/5922#pi20290=1

Support Solutions WIKI Articles:
https://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki

Question:

How do you rename horizontal alignment point names?

Answer:

1. Go to Geometry>Horizontal Curve Set>Events (in some cases, you may want to consider assigning point names at Geometry>Utilities>Assign Names before creating event points).
2. Toggle on "Alignment Point to Cogo".  You do not need to specify a seed name.  Click Apply. This will add your alignment points to your cogo buffer.
3. Now go to Geometry>Cogo Points>Rename.  From here you will be able to select your horizontal alignment point name and rename it to whatever you desire.
4. When you review your horizontal alignment, you will see that the point names in parenthesis have updated to the new names you provided.

Question:

When opening a design file in Microstation alone, temporary survey graphics that have been previously displayed remain in the file.

or

When opening a design file with InRoads and MicroStation, graphics are visible until a MicroStation command is run, then the graphics disappear. 

Answer:

When displaying temporary survey graphics in a design file using the command Survey > View Survey Data, it is important to recognize that these graphics are actually written to the design file as graphic elements.  What makes these graphics “temporary” is that they are marked with an XAttribute which only makes them visible when the fwd containing the data is loaded in InRoads.

To resolve this issue, Bentley has developed a utility that will delete temporary graphics from MicroStation design files.  With this utility, the user has the option to completely delete the survey graphics or strip the graphics of their element attributes.

The Delete Survey Graphics Utility can be downloaded HERE.

Once installed, the utility can be accessed from the Windows Start Menu - Start > All Programs > Bentley > Delete Survey Graphics.

At Directory (within the Delete Survey Graphics dialog box) navigate to the folder that contains the design files with survey graphics to be deleted or stripped and Apply.  All file in the folder selected will be processed.

This wiki explains "Add Station Equation" tool.

The "Add Station Equation" tool is used to define a station equation at a designated location on the alignment. Multiple station equations can be added to an element, but that should be added in order from the beginning to end of element.

Steps to add station equation :

1. From the Task Manager, select "Horizontal Geometry > Add Station Equation".

2. Follow the heads-up prompts. Locate the alignment.

3. Locate the "Back Station", and give the required value for back station.

4. Locate the "Ahead Station", you must specify a name say, a13+00

The Station Equations can be removed through Project Explorer.

Question:

How can I extract a construction limit or a footprint of my road design from my corridors?

Answer:

1. Set the design stage to one that creates the corridor top mesh.
2. Within the Default 3D model, create a selection set of the corridors you want to include as the construction limit.
3. Go to Tools > Mesh > Mesh Utilities > Extract Boundary

1. Data point to accept to extract boundary from mesh elements.
2. If you selected multiple corridors, you may need to trim the overlapping boundary lines. You can use the Trim Multiple MicroStation tool found from going to Tools > Manipulate > Modify > Trim Multiple.

Question 1: What license is required to run OpenRoads Designer CONNECT Edition?

Answer 1: A license for the product "OpenRoads Designer" (Product ID 2515) is required.

Question 2: What other products can I run using an OpenRoads Designer license?

Answer 2:

Question 3: Is a separate license required to run the SUE/SUDA tools, the gINT Civil Tools, or the Reality Modeling tools that are included in OpenRoads Designer?

Answer 3: No, all the tools delivered with OpenRoads Designer are included int he OpenRoads Designer license.  This includes the SUE/SUDA tools (up to 100 nodes), the gINT Civil Tools, and the Reality Modeling tools.

Roadway Designer Template Transition

This workflow will walk through a generic template transition.  Keep in mind that two templates must be dropped in the same corridor to run this workflow.

The first step is to complete the connection between the points from template one to template two.  (This will show the Roadway Designer how to connect the points from one template to the next.  If the two templates have the same point names in both templates, this portion will be completed automatically and show a dark blue rectangle.)  This can be done by double clicking on the rectangular shape in the Roadway Designer’s Plan View or right clicking on the shape and selecting “Edit”. 

Once the Edit Transition dialog populates, the connection will need to be completed for all the points.  These points that require user adjustments will be displayed with a bold plus sign.  (If this process is not completed, there is a high possibility that some of the points/components will not be created within the surface.) 

 

 If it is hard to view the two templates, the view can be moved by right clicking on a point and selecting “Move Template”.

Figure 5.  Edit Transition Midpoint – Before edits

In this dialog, some of the point constraints must be “released” from the template points so the template can transition properly.  This can be accomplished by right clicking on the point that will be moving/transitioning and selecting the constraint that needs to be released. 

 Figure 6.  Edit Transition Midpoint – release/delete constraints

There is a scrollbar at the bottom of the dialog that will show how the template will transition from one template to the next over the station range specified.  When the correct constraints have been released, the transition can take place.  Check the transition with the scrollbar to verify that the transition looks/appears correctly. 

Figure 7.  Edit Transition Midpoint – Use of Scrollbar

Once the template appears to transition correctly in the Edit Transition Midpoint dialog, select "OK".  At this time, the transition has been addressed correctly/completely and it will be applied to the Roadway Designer.

Figure 8.  Plan View – After transition is complete

The transition is shown to be "addressed" with a dark blue rectangle in the plan view of the Roadway Designer.

See Also

Product TechNotes and FAQs

InRoads Product TechNotes FAQs And Support Video Clips

External Links

Bentley Technical Support KnowledgeBase

Bentley LEARN Server

Comments or Corrections?

Bentley's Technical Support Group requests that you please confine any comments you have on this Wiki entry to this "Comments or Corrections?" section. THANK YOU!