Question :

What is the difference between Geometry string (GC string) and Master String (MC string)?

Answer:

Master Strings : are 6D strings and are generated from an alignment. Each point on Master string has 6 dimensions : x, y, z, chainage, tangent bearing and radius of curve. Each Master string has an associated Geometry string.

Geometry String : has 12 dimensions and store information about an alignment, for example, the horizontal and the vertical tangent points of the strings. A geometry string contains all the information necessary to generate the master string.

Click the video below to play it. To view in fullscreen mode, first click the YouTube link at the bottom of the video to launch the video on the YouTube site. Then, click the fullscreen button (rightmost button at bottom of video). Recorded in 1280 X 720 resolution. (Please visit the site to view this video)

(Please visit the site to view this video)

This video demonstrates how to remove civil rules from multiple elements at one time .

Click the video below to play it. To view in fullscreen mode, first click the YouTube link at the bottom of the video to launch the video on the YouTube site. Then, click the fullscreen button (rightmost button at bottom of video).

 Recorded in 1280 X 720 resolution. 

[View:https://youtu.be/q5fzommiZBYp>

This video demonstrates how to utilize the Switch Height Plan in Bentley Rail Track.  The main focus is on the Plan display along with the Profile and Stationing Diagrams.

Click the video below to play it. To view in fullscreen mode, first click the YouTube link at the bottom of the video to launch the video on the YouTube site. Then, click the fullscreen button (rightmost button at bottom of video).

 Recorded in 1280 X 720 resolution. 

(Please visit the site to view this video)

This video is a continuation of the Switch Height Plan command in Bentley Rail Track.  It will demonstrate the display of the Chord Offset Diagram for horizontal alignments.

Click the video below to play it. To view in fullscreen mode, first click the YouTube link at the bottom of the video to launch the video on the YouTube site. Then, click the fullscreen button (rightmost button at bottom of video).

 Recorded in 1280 X 720 resolution. 

(Please visit the site to view this video)

Problem Description : MXRoad suite or MXRoad or both not seems to be activated under License Management Tool.

Causes:

1. First check number of licenses you have for the MXRoad Suite or MXRoad or both and same number of licenses should be activated on the system.

2. Check shortcut of MX Road Suite, MXRoad or both activated on the desktop or under Start > All programs > Bentley
   

3. While activating licenses through Tool > Product Activation Wizard > Server Name should match with the document received by you from the Bentley Systems analyst.
   

4. Same Sever Name should be entered under License Management Tool when you select Tools > Options & Tools > Product Activation Wizard.
   

   
   

Solution:

1. First Activate the license through Start > All programs > Bentley > MX Options > Licensing Tool and If you launched MXRoad Suite or MXRoad, go to File > Cad Menu> Utilities > License Management Tool.

2. Create Shortcut for MXRoad Suite or MXRoad or both, go to All programs > Bentley > MX Shortcut Generator, select MXRoad Suite or MXRoad or Both.

3. If you require only MXRoad Suite not MXRoad then first you need to create shortcut for MXRoad Suite and then after only MXRoad Suite seems to be activated under License Management tool.

4. If MXRoad seems to be activated under License Management Tool and if you require MXRoad Suite instead MXRoad, then delete Shortcut of MXRoad from desktop and create Shortcut for MXRoad Suite.

Problem Description: Unable to Import .3mx file in MXRoad

Solution: File of Type .3mx is available in latest version of MXRoad 08.11.09.878

To import .3mx file in MXRoad , go to File > Cad Menu > Tools > References > Attach > .*.3mx file.

Overview:

This information is included in the Reference Information delivered with the Help file in InRoads under the topic "Survey Feature Custom Operations (New/Edit Style)".  This document is to be treated as a quick reference to the custom operation options and values that are used by InRoads to display survey data.  Please refer to the InRoads Help for complete and comprehensive information regarding Custom Operation.

Survey Feature Custom Operations

Summary - Operation Values

Option                                          Custom Operations

Place Text                                    '$(NAME)

                                                       '$(FCODE)

                                                       '$(ELEVATION)

                                                       '$(NORTH)

                                                       '$(EAST)

                                                       '$(CODE)

                                                       '$(ATTRIBUTE)

                                                       '$(NOTES)

Custom Fonts                             FT=[font number]

                                                       FT=[font name]

Font Symbol                                '\(numerical code)

Symbology                                  LV=[Level Name]

Positioning                                  DY=

                                                    DX=

                                                    LS=

                                                    PR=

                                                    PRZ=

                                                    CO=

                                                    RESET

                                                    LC=

                                                    WT=

                                                    TX=

Place Line                                   LINE

                                                      MOVE

Justification                                JT=RB <=right bottom
                                                     JT=RC <=right center
                                                     JT=RT <=right top
                                                     JT=CT <=center top
                                                     JT=CB <=center bottom
                                                     JT=CC <=center center
                                                     JT=LT <=left top
                                                     JT=LC <=left center
                                                     JT=LB <=left bottom

Cell/Block                                   AC=(Cell/Block name)

Active Scale                               AS=

Active Angle                              AA=

Alpha Operators                       = , <>

Numeric Operators                 = , <> , > , < , >= , <= , + , - , * , / , **

Lookup table                            LOOKUP=

Find Tables                              FIND=

 --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Descriptions

Placing Text:  Placing text is similar to using a spreadsheet, the text must be proceeded by a single quote ('). Point numbers, feature codes, elevations, and northing and easting can be placed at the point by using the following format:

'$(NAME)
'$(FCODE)
'$(ELEVATION)
'$(NORTH)
'$(EAST)

The entire point code string (as opposed to just the feature code) can be referred to in the following manner:

'$(CODE)

Attributes can also be placed as text. Each attribute is distinguished by the attribute name. Suppose that one of the attributes for an oak tree is the trunk size. The attribute may be called "SIZE." To place the trunk size on the drawing, enter the following:

'$(SIZE)" OAK

Field notes can be displayed at the point and committed to the design file by keying in the following:

'$(NOTES)

Custom Fonts:  Custom Operations lets you use custom fonts. You can also use fonts other than the active font. To include a font style that is different from the other text in the drawing, you can enter the following:   FT=[font number]

InRoads Survey also supports fonts loaded on your machine as part of the Windows operating system:FT=[font name]

Placing Font Symbols:

'\(numerical code)

Symbology:  You can place text on a specific level with the following command:

LV=[level name]

Positioning Custom Operations:  The software will remember the location and place all text starting from the actual point location.

DY=change in y from the feature point coordinates.
DX=change in x from the feature point coordinates.

LS=active line spacing
PR=precision of the features displayed quantities (used for numerical text). PR does not control elevation output.
PRZ=precision of the features elevation or z-values
CO=color numerical value, attribute with numerical value, or numerical equation
RESET=reset the position to the actual point location
LC=active line style
WT=weight
TX=text size based on numeric value or attribute with numeric value

Placing Lines:

LINE=places a line

MOVE=specifies that the program should move to the specified location following the prompt.

Justification:

JT=RB <=right bottom
JT=RC <=right center
JT=RT <=right top
JT=CT <=center top
JT=CB <=center bottom
JT=CC <=center center
JT=LT <=left top
JT=LC <=left center
JT=LB <=left bottom

Placing Cells/Blocks:

AC=(cell/block name)

Active Scale: The Active Scale command is used only for scaling cells.

AS=scale
AS=$(numerical attribute)

Active Angle:  You can define an absolute angle for rotating all graphics placed with custom operations using the active angle command, as follows:

AA=$(<attrib>)

where <attrib> specifies an attribute that defines an angle value. For example, the attribute can be named ROTATE, and the Active Angle operation can be used.

Alpha Operators:  There are only two operators that act on alpha attributes:

Numeric Operators:

Math Functions:  Math functions are supported which allow the use of variables. All basic math functions (+, -, *, /) are supported. Exponents are also supported (such as 3**2 (value of 9)). However, the software does not check for floating-point overflow. This mathematical command should be used with caution.

Lookup Tables:  Lookup tables are used to assign certain values to field key-ins based on the criteria you specify. This relieves the field crews from long key-ins and other items that only regard drawing production (font symbols, cells, math calculations, and so on). For example, when a surveyor enters numerical or alpha characters for an attribute, the lookup table will manipulate the value to place text, change fonts, insert font symbols, and so on.

Lookup=(Table Name)

Find Tables:  Find tables are similar to lookup tables because they are used to place text based on attribute value. The difference is that the find table can place multiple descriptions based on the number of characters placed in the attribute field.

Find=(value)

Question :When selecting the alignment, the drag handles are missing. How to get back the drag handles?

Answer: You can toggle the drag handles from the "Element Selection" dialog box.

SIGN UP for Future OpenRoads SIG Meetings

VIEWPast OpenRoads SIG Meetings

Questions and Answers

October 2016 - OpenRoads ConceptStation

Question: Where can I find more info on creating more templates?

Answer:http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/7045.corridor-modeling-openroads

http://learn.bentley.com/app/Public/ViewLearningPathDetails?lpId=104644

Question: How do I create a surface that follows the top of my template?

Answer:http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/7031

Question: How do you share template you have created?

Answer: Go to Tools>Template Library Organizer. Typically there is a core library that contains your standards, then there is a project library where you can edit standards to be project specific. Select the template library organizer, and you can open both of the libraries and copy templates back and forth.

Question: When editing the template, how do you enter the ground slope? We want 3%, but when I type in 3 I get 300.

Answer: To get 3% you must enter either 0.03 or 3% or a ratio 3/100, not 3.

May 2016 - OpenRoads ConceptStation

Question: Does ConceptStation have the ability to model retaining walls, curb & gutter, etc.?
Answer: The roadways and bridges are template-based and can contain curb\gutter walls, etc.

Question: Is ConceptStation CPU based or GPU like LumenRT?
Answer: ConceptStation is GPU based. Therefore performance is relative to the quality of the video that is installed. ConceptStation requires a minimum 2G video card.

Question: Can you export data to OpenRoads?
Answer:http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/27777.video-openroads-conceptstation-exporting-data-to-openroads

Question: Can you export images and videos of the concepts?
Answer: You can export images and create videos. ConceptStation includes the LumenRT visualization tools to easily create videos.

Question: Can you create/edit your own templates?
Answer: Yes, templates are completely configurable.

Question: Can you import DTM, ALG, and IRD data into ConceptStation?
Answer: You can directly import DTMs and ALGs. The IRD file is not supported at this time.

Question: How do I get Concept Station?
Answer: Concept Station is available for download from the software fulfillment center at http://select.bentley.com/FulfillmentCenter

Question: Which superelevation standards does ConceptStation use?
Answer: Superelevation in ConceptStation is based on the AASHTO standards.

April 2016 - Putting the Pieces Together: Creating Composite Models in OpenRoads

Question:  Should I create a terrain model from corridor mesh elements or 3D features?
Answer:http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/28219.create-terrain-model-from-corridor-features-or-mesh

Question: Can you change your ditch flowline from within the dynamic cross section window?
Answer: At present time, edits to geometry cannot be made in dynamic cross sections.

March 2016 –ContextCapture - A 3D Photo is Worth a Thousand Words and More!

Question: What sort of camera is recommended for use with ContextCapture?
Answer:http://communities.bentley.com/products/3d_imaging_and_point_cloud_software/w/wiki/27132.camera-recommendation-for-contextcapture

Question: How do you delete out items such as trees from a mesh that was created in ContextCapture to prevent models from targeting them?
Answer: If you output the 3D data as a point cloud, you can use point cloud classification to filter the data.

Question: Does ContextCapture work inside a building?
Answer: http://communities.bentley.com/products/3d_imaging_and_point_cloud_software/w/wiki/27133.interior-use-of-contextcapture

Question: What are the hardware requirements?
Answer:http://communities.bentley.com/products/3d_imaging_and_point_cloud_software/w/wiki/26310.what-are-the-minimum-recommended-system-requirements-for-contextcapture

Question: Can you use the zoom function on a camera?
Answer:http://communities.bentley.com/products/3d_imaging_and_point_cloud_software/w/wiki/27134.use-of-camera-zoom-in-contextcapture

Question: How well does ContextCapture work with a combination of cameras, i.e. a combination of drone images and hand held camera images?
Answer: http://communities.bentley.com/products/3d_imaging_and_point_cloud_software/w/wiki/27135.multiple-camera-use-in-contextcapture

Question: What is the difference between Tie Points and Control Points?
Answer:http://communities.bentley.com/products/3d_imaging_and_point_cloud_software/w/wiki/27136.contextcapture-difference-between-tie-points-and-control-points

Question: Can you combine the photo mesh with a topo survey to create a more accurate mesh?
Answer: http://communities.bentley.com/products/3d_imaging_and_point_cloud_software/w/wiki/27137.contextcapture-combination-of-survey-data-and-photos

Question: Can you cut and store sections?
Answer: Yes – Use the Section Tools available with Descartes.

Question: How do you create a control point?
Answer:http://communities.bentley.com/products/3d_imaging_and_point_cloud_software/w/wiki/27138.contextcapture-create-control-point

Question: Can point cloud sections follow an alignment?
Answer:http://communities.bentley.com/products/3d_imaging_and_point_cloud_software/w/wiki/27142.create-cross-sections-along-an-alignment

Question: Does ContextCapture work on smooth surfaces like a white wall?
Answer:http://communities.bentley.com/products/3d_imaging_and_point_cloud_software/w/wiki/27139.smooth-surfaces-in-contextcapture

Question: Can you use frames from a video?
Answer:http://communities.bentley.com/products/3d_imaging_and_point_cloud_software/w/wiki/27140.use-of-videos-in-contextcapture

Question: Is Descartes required? What functions are lost if you don’t have Descartes?
Answer: Descartes isn't required. Drawing and snapping to the points can be done in MicroStation; however, Descartes contains tools that make working in the point cloud easier. Descartes allows you to snap and draw more efficiently, classify the points, cut sections, etc. from the point cloud.

Question: Can supplemental photos be added later to update already-processed data or does the entire data set needed to be reprocessed?
Answer:http://communities.bentley.com/products/3d_imaging_and_point_cloud_software/w/wiki/27141.contextcapture-add-additional-photos

Question: Are there limits to rounding of the lens (for example, a GoPro might have a really wide angle)?
Answer: No, there are no limits, and ContextCapture does support GoPro.

Question: When using ContextCapture, will the GPU effect the quality or just the length of time to process?
Answer: The GPU does not affect the quality, just the processing time.

February 2016 - The OpenRoads Workspace

Question: When using imperial files, does Bentley now have the ability to use US Survey Foot?
Answer:http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/26923.survey-foot-units-in-ss4

Question: How do I use my previously created XIN/DDB files to build my OpenRoads standards?
Answer: http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/7051
              http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/7025

Question: Will my template library be included in my DGNLIB?
Answer: The Template Library (.itl) exists independently outside a DGNLIB.

Question: How do I migrate component styles from SS2 to OpenRoads?
Answer:https://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/19918.video-migrate-component-styles-from-ss2-to-openroads

Question: How do I import project settings and data from SS2 into OpenRoads?
Answer:http://learn.bentley.com/app/VideoPlayer/LinkToIndividualCourse?LearningPathID=108805&CourseId=111138&MediaID=5005147

Question: Will the new workspace "workset" examples delivered with OpenRoads CONNECT Edition?
Answer: Yes, we will deliver Workset/Workspaces OpenRoads CONNECT.

Question: What is the difference between civil cells and templates?
Answer:http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/26927.how-do-civil-cells-differ-from-templates

Question: Can we get a list of all OpenRoads configuration variables?
Answer:http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/26928.where-is-a-list-of-openroads-configuration-variables

Question: Are there any videos on roadway modeling using Inroads generated information?
Answer:http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/7045.corridor-modeling-openroads

January 2016 –Hitting the Target – Using and Managing End Conditions

Question: When should I use end conditions as opposed to point controls?
Answer: Point Controls are an excellent choice when you are able to define or already know the geometry needed. End Conditions are better to solve when some of this is unknown. Additionally, you can use end condition priorities to analyze alternatives in a specific order that makes engineering sense.

Question: Can you use target aliasing from Corridor A to B, and then at another location from B to A?
Answer:http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/26376.recursive-situations-in-target-aliasing

Question: What are the rules that govern how end conditions are solved at each template drop?
Answer:http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/25289.end-condition-rules

Question: How do I use end conditions to target an alignment?
Answer:http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/17904.video-corridor-references-end-condition-targets-alignment

Question: How do can I override an end condition using End Condition Exceptions and Point Controls?
Answer:http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/17906.video-targeting-with-end-condition-exceptions-and-point-controls

Question: How can I use target aliasing and corridor clipping to modify areas of overlap between multiple corridors?
Answer:http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/19151.video-target-aliasing-and-corridor-clipping

Question: When I initiate the Target Aliasing tool, I get a reminder to set the configuration variable, TARGET_ALIAS_ALLOW_ALL_LINEARS. What does this mean?
Answer:http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/23364.show-all-linear-targets-in-target-aliasing

Question: Does target aliasing work in similar fashion in GEOPAK?
Answer: Yes this technology exists in GEOPAK, InRoads and MX.

Question: I was wondering about using End Conditions in a corridor that passes through a zone that has multiple stratum.How can we use a different slope for every strata of the soil/existing terrain? Can OpenRoads calculate volumes of cut for every strata?
Answer: You can have targets that seek different surfaces. The cut volumes can be calculated using End Area Volumes.

• http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/16530.video-end-area-volumes-overview
• http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/16531.video-end-area-volumes-unsuitable-materials-exceptions-factors
• http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/16532.video-end-area-volumes-classifications

December 2015 - See What I Mean? Visually Communicating Your Design with LumenRT

Question: What are the suggested computer hardware requirements? (ie, video card, memory, processor)
Answer: The best results will be obtained with a high-quality gaming-style graphics card (2GB video memory on video card and 4GB or more of hard drive memory).

Question: Are there any limitations with model size or road length?
Answer: Any limitations would be based on your graphics card. There are no set limits when exporting from MicroStation Connect 64bit.

Question: Can you slice through the display to create a cross section?
Answer: Yes, you can generate cross sections.

Question: What kind of man-hour effort was required to develop this model or a similar model suitable for public presentation?
Answer: Once you go from the civil application into LumenRT, you can create a model in a few hours. Then you can immediately create screen captures. You can create a LiveCube in under an hour. Movies will take approximately 8 hours to render.

Question: What kind of resolution is available for images and videos? Can LumenRT produce HD quality?
Answer: HD is available and up to 4K video output.

Question: How do I obtain LumenRT?
Answer: LumenRT is part of ELS and is available on SELECTServices for download. A 7 day trial is available. See the following link for download and installation instructions: http://communities.bentley.com/products/microstation/microstation_visualization/w/microstation_visualization_wiki/25198.how-to-download-and-install-bentley-lumenrt

Question: Can LumenRT import VISSIM?
Answer: Yes, as long as you are in a 2D plane.

Question: Will lighting from street lights show up in LumenRT?
Answer: Yes, lighting can be handled externally. Interior lighting options are available as well.

Question: Where can I find LumenRT training?
Answer: http://learn.bentley.com/app/Public/BrowseLearningPaths?productlineId=26143&CustomLP=False

Question: Can LumenRT import SketchUp models?
Answer: Lumen does not import SketchUp models (skp files) directly.

November 2015 - Creating Civil Cells

Question: If you have created a civil cell with a driveway placed perpendicular to the mainline, can the driveway be at a skewed angle when you place the civil cell?
Answer: Yes - in fact this is demonstrated in the videos at this link: http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/7064

Question: Can the radius defined in a civil cell be edited after it is placed into your design?
Answer: Yes, the radius can be changed as needed after placing the civil cell. Edits to geometry within a civil cell are locally contained in the active DGN. The civil cell that is stored in the DGNLIB is not impacted.

Question: When clipping with a civil cell, does the clip affect the elements to be clipped in their whole depth, or does the civil cell only clip the layers which intersect with the depth of the cell?
Answer: http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/23252.depth-of-civil-cell-clipping

October 2015 - Working with the OpenRoads Navigator Mobile App

Question: When will OpenRoads Navigator Mobile App be available?
Answer: OpenRoads Navigator Mobile App is now in available in a Beta version running through the Apple Test Flight program. The target date for commercial iOS release is November 2015. The app will be available on Android later this year.

Question: Is there a possibility that the two different formats (i.dgn and .imodel) will merged to become the same format which can be opened both in desktop and on mobile?
Answer: Yes, the goal is to move everything to the .imodel.

Question: Will the documents such as PDF/Word/Excel that are linked in the DGN transfer to OpenRoads Navigator Mobile App?
Answer:http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/25168.attaching-documents-in-openroads-navigator

Question: Can you locate a point using GPS in the field?
Answer:http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/25169.locate-point-in-the-field

Question: How do you locate an issue on the screen?
Answer:http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/25170.locate-issue-on-screen

Question: How do you purchase OpenRoads Navigator Mobile App?
Answer: You can purchase a single passport for all mobile apps (ProjectWise Mobile, OpenRoads Navigator, etc).

Question: Can the coordinate information be displayed as Station-Offset?
Answer: Yes, as well as Lat-Long. If it is 3D, you will also get elevation.

Question: Which iOS devices will be supported?
Answer: Currently, iPad is the only supported Apple device. This is due to an Apple requirement that any iPhone app is supported on ALL version of iPhones.

Question: Can you use the station-offset feature with InRoads/GEOPAK files (.alg/.gpk)?
Answer:http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/25171.using-station-offset-tool-with-civil-data

Question: What is the file format that is exported from OpenRoads Navigator Mobile App?
Answer:http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/25172.openroads-navigator-file-format

Question: Can you reference the markup in a DGN?
Answer: Not in the current v8i version - this option will be available in the Connect edition.

September 2015 - Subsurface Utility Design and Analysis (SUDA)

Question: Are there any conflict management tools included in SUDA or is that only available in SUE?
Answer:http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/24021.availability-of-conflict-management-tools

Question: What is required if you need to design more than 100 inlets using StormCAD?
Answer:http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/24022.what-if-i-need-more-than-100-inlets-in-stormcad

Question: Is the 100 inlets limitation per drainage library, or is it the total number of allowed inlets within StormCAD?
Answer:http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/24023.is-the-stormcad-100-inlets-limitation-per-drainage-library

Question: Can I use the layout options without having a Subsurface Utility Engineering license?
Answer :http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/24024.can-i-use-layout-options-without-having-a-subsurface-utility-engineering-license

Question: Can nodes be placed as an offset to the alignment?
Answer : http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/24025.can-nodes-be-placed-as-an-offset-to-the-alignment

Question: Is it possible to design your own structures and feature definitions for use in SUDA/SUE?
Answer:http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/17693.video-creating-cells-to-use-in-sue-feature-definitions

Question: Does pipe connection direction matter?
Answer:http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/24026.pipe-connection-direction

Question: Can you assign multiple drainage areas to an inlet?
Answer:http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/24027.assign-multiple-drainage-areas-to-inlet

Question: How do you change the outflow for a catchment area?
Answer:http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/24028.change-catchment-outflow

Question: Can you assign multiple land uses within an area and calculate a composite c-value?
Answer:http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/24029.calculate-composite-c-value

Question: If you move a node, will the attached pipes move with the relocated structure?
Answer:http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/24030.do-pipes-adjust-when-nodes-are-relocated

Question: Can you have preloaded Scenarios to use for multiple projects?
Answer:http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/24032.where-are-scenarios-stored

Question: What formats are available for SUDA/SUE reports?
Answer:http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/24033.sudasue-report-formats

Question: Can you calculate c value with an impervious map like GEOPAK drainage?
Answer: That functionality is not currently available.

Question: Can conduits link to the center of the inlet instead of the walls of the inlets?
Answer:http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/24034.link-conduits-to-center-of-inlet

Question: Which of the OpenRoads products include StormCAD for OpenRoads 100 Inlets (part of Subsurface Utility Design and Analysis tools) at no extra fee?
Answer:http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/23051.which-products-include-stormcad-for-openroads-100-inlets-at-no-additional-fee

Question: Can you calculate on-grade spread? Can the spread section be read off of the surface?
Answer: That functionality is not currently available.

Question: When will Open Roads be tied into the Connect Edition of MicroStation?
Answer: The OpenRoads CONNECT edition (naming not confirmed) is currently in development. Look for an announcement soon regarding a target release date.

Question: What exactly are the SUDA/SUE structures?
Answer:http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/24036.what-are-sudasue-structures

Question: How do you change the runoff method?
Answer:http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/24037.change-runoff-method

Question: Can you import the cell libraries from GEOPAK drainage?
Answer:http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/24038.import-geopak-cell-libraries-in-suesuda

Question: When was SUDA introduced into the civil products?
Answer:http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/24035.when-was-suda-introduced-into-the-civil-products

August 2015 - Civil Cells

The data used in this month's session is from the LEARNserver class, Using Civil Cells In OpenRoads. This class can be accessed HERE.

Question: How are civil cell rules impacted when making manual adjustments to individual elements after placement?
Answer: http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/23241.where-are-manual-adjustments-to-civil-cells-stored

Question: Can two or more civil cells be merged? 
Answer: http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/23242.can-civil-cells-be-merged

Question: How do you determine quantities within a civil cell?
Answer:http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/23244.quantities-in-civil-cells

Question: Is there a recommended method for addressing overlaps when the end conditions targeting the existing DTM extend and overlap each other through a radius return?
Answer:http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/16056.video-overlapping-slopes-at-intersections-with-relatively-long-cutfill-slopes

Question: Is there a way to extract multiple lines with the Plan By 3D Element tool?
Answer:http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/23245.extract-multiple-lines-with-plan-by-3d-element

Question: What the best practice for creating superelevation through the civil cell?
Answer:http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/23246.how-to-add-superelevation-to-a-civil-cell

Question: Can you change the civil geometry stationing in a civil cell to match the direction of the corridor stationing?
Answer:http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/23247.transpose-stationing-in-civil-cell

Question: Why can't I create civil cell using elements that were created using Simple Arc From Element?
Answer:http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/23248.unable-to-create-civil-cell-using-simple-arc-from-element

Question: How you can remove a snap constraint?
Answer:http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/23249.remove-snap-constraint

Question: I receive a message that says "Cannot Select 3D Element" when I attempt to place my civil cell.
Answer:http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/23250.civil-cells-message-cannot-select-3d-element

Question: When clipping with a civil cell, does the clip affect the elements to be clipped in their whole depth, or does the civil cell only clip the layers which intersect with the depth of the cell?
Answer:http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/23252.depth-of-civil-cell-clipping

July 2015 - Using OpenRoads and Descartes to Maximize the Value of Point Clouds

Question: If I receive a point cloud that does not have classifications, can I edit the classifications in OpenRoads?
Answer: http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/22546.edit-classification-of-point-clouds

Question: Do I need a separate license for Descartes?
Answer: http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/17812.separate-license-for-subsurface-utility-engineering-sue-and-descartes

June 2015

Question: How do I set up my own Design Standards?
Answer: http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/14978.setting-up-design-standards-in-openroads

Question: How do I change the display of the handlers/manipulators in OpenRoads?
Answer: http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/14440.change-color-of-handlers-and-manipulators

Question: How do I open the Civil Message Center in OpenRoads?
Answer:http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/21883.open-civil-message-center

Question: How do I remove the design standards for a civil element?
Answer:http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/21885.remove-design-standards-from-element

Question: How can I customize civil accudraw settings? Where is the Offset-Offset option?
Answer: This video link provides an introduction to Civil Accudraw.  Skip to the 7:30 minute mark in the video for the answer to this specific question.
http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/17927.video-introduction-to-civil-accudraw

Question: How do I create a best fit alignment from survey data using OpenRoads Technology?
Answer:http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/21512.video-create-a-best-fit-alignment-from-survey-data

Question: How do you auto-annotate geometry in GEOPAK?
Answer:http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/7035.video-view-stationing-and-annotation-for-horizontal-geometry-geopak

May 2015 - Using Point Clouds with OpenRoads and Descartes

Question: Is there a way to turn off the display of point clouds from view without detaching them?
Answer: http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/21733.turn-off-display-of-point-clouds

Question: Can I use a scalable terrain model for OpenRoads design?
Answer: http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/21738.use-scalable-terrain-models-in-openroads

Question: Does Descartes require a separate license from InRoads/GEOPAK/MX?
Answer: http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/17812.separate-license-for-subsurface-utility-engineering-sue-and-descartes

Question: Can the templates in Descartes be used in OpenRoads?
Answer: http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/21739.use-descartes-templates-as-openroads-templates

April 2015 - Intersection Modeling (Part 2)

Question: How do I combine one or more terrain models?
Answer: http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/16944.combine-one-or-more-terrain-models

Question: How do I apply a linear template?
Answer: http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/7046.video-apply-linear-template-with-civil-cell-intersection

Question: What is the purpose of the check boxes next to the Feature Definitions in Project Explorer?
Answer:http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/20953.feature-definition-check-boxes

Question: How do you change the feature type of a terrain model element?  For example, I would like to change a breakline to a boundary element.
Answer:http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/20954.change-terrain-model-feature-type

Question: Can you use parametric constraints with linear templates?
Answer: http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/20955.parametric-constraints-in-linear-templates

Question: How do I remove the Lock in the heads-up display if I want to input a new value?
Answer:http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/20956.how-to-remove-the-lock-in-the-heads-up-display

Question: Can I merge a linear template into an existing terrain model?
Answer:http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/20958.merge-linear-template-into-terrain-model

March 2015- Intersection Modeling (Part 1)

Question: I have created horizontal geometry in 2D and have also created corresponding vertical geometry in profile view. Why isn't this feature being displayed in my 3D model?
Answer: http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/20029.feature-not-displayed-in-3d-model

Question: How can I create a profile to match the slope and elevation of adjoining profiles?
Answer: http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/20038.video-quick-profile-transition-tool

Question: I am trying to create a driveway profile and need to match the grade of the centerline alignment. How can this be done?
Answer: http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/17657.place-profile-intersection-point-tool

Question: If you have used the Profile Intersection Point tool to determine the location of a point in profile, will the profile update if the point of intersection is revised?
Answer: http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/20041.will-a-profile-update-if-the-profile-intersection-point-is-adjusted

Question: Is there a way to automatically create a profile as I am placing my horizontal geometry?
Answer: http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/15781.video-create-3d-automatically

February 2015 - SELECTseries 4 Update

Question: Where are the symbology, precision, and settings defined for the Inverse Points tool?
Answer: http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/19381.settings-for-inverse-points-tool

Question: I have created a Point Feature Station Offset Elevation Report, however the elevations are all blank. Why is this?
Answer: http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/19382.elevation-is-left-blank-in-point-feature-offset-elevation-report

Question: I have imported a Terrain Model from DTM, but I can not append extra data outside the boundary and the Terrain does not honor the Edge Method settings (Max Triangle Length/Slivers).
Answer: http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/19383.boundary-creating-problems-when-mergingmanipulating-terrain-model

Question: There are several components displayed in my cross section that I do not want considered in End Area Volumes. Is there a way that I can exclude them from the calculations?
Answer: http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/19385.ignore-components-in-end-area-volumes

Question: How do you import feature definitions in order to begin setting up standards for InRoads SS3/SS4?
Answer: http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/7025.video-how-to-import-feature-definitions-inroads

Question: What is the difference between the Profile By Slope From Element tool and the Profile By Variable Slope From Element tool?
Answer: http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/19386.difference-between-profile-by-slope-from-element-tool-and-profile-by-variable-slope-from-element-tool

Question: When opening a DGN file, I receive the following message: "Obsolete Civil Data Found..." Why am I receiving this message??
Answer: http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/16023.error-message-obsolete-civil-data-found

Question: When upgrading to SELECTseries 4, do DGNLIBs and seed files have to be upgraded to the new format in that same way that DGN files must be upgraded?
Answer: http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/19384.upgrading-dgnlib-seed-files-and-civil-cells-to-ss4

January 2015 - Where Do I Start?

Question: How do I update a Feature Definition from a DGNLIB that has been revised?
Answer: http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/18899.video-updating-feature-definitions-from-a-revised-dgnlib

Question: How do I change the Feature Definition from one "Type" to another?
Answer: http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/18900.change-type-of-feature-definition

Question: I do not have the Civil Standards, Civil Model, or Survey tabs in my Project Explorer, how can I turn them on?
Answer: http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/13077.unable-to-access-survey-civil-standards-or-civil-model-in-project-explorer

Question: Where do I sign up for the next OpenRoads SIG Meeting?
Answer: Access to the OpenRoads SIG meetings is managed through the Bentley Institute LEARNserver.  Below is a link to the Learning Path that contains past and future sessions:
http://learn.bentley.com/app/Public/ViewLearningPathDetails?lpId=107842

Question: I have additional questions/problems that were not addressed during the last meeting.  Where can I send those questions to be addressed?
Answer: The best place to search for answers and post new questions is on the Bentley Communities Forums and Support Solution WIKI pages.

Forums:
https://communities.bentley.com/products/road___site_design/f/5922#pi20290=1

Support Solutions WIKI Articles:
https://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki

Question:

Which commands use the "Terrain Model Feature Type" field in the Linear Default Settings section of the Feature Definitions?

Answer:

Currently, the "Terrain Model Feature Type" for features imported into a terrain is set by each command individually during import. This field in the Feature Definition is currently not being used, but may be at some point in the future. (Note: The survey commands do use the "Terrain Model Attribute" when building the terrain.)

This video demonstrates how to get rid off from export to AutoCAD error of "Error Creating File".

Click the video below to play it. To view in fullscreen mode, first click the YouTube link at the bottom of the video to launch the video on the YouTube site. Then, click the fullscreen button (rightmost button at bottom of video).

(Please visit the site to view this video)

Overview

Cross Section Sheet Composition Tool

This video demonstrates how to use the Cross Section Sheet Composition tool to generate Cross Section Sheets 

Support Video Clip

(Recorded in 1024 x 768 resolution.)

Comments or Corrections?

Bentley's Technical Support Group requests that you please confine any comments you have on this Wiki entry to this "Comments or Corrections?" section. THANK YOU!

Overview

Cross Section Reports > Profile grade report

This video demonstrates how to use the Profile grade report to create alignments and profiles from xs.

Support Video Clip

(Recorded in 1024 x 768 resolution.)

Comments or Corrections?

Bentley's Technical Support Group requests that you please confine any comments you have on this Wiki entry to this "Comments or Corrections?" section. THANK YOU!

This video demonstrates the methods to delete string, here I have explained three methods to delete string, first method is to delete string, here the string will be deleted from the model , 2nd method I have explained , if you have a model which contain only one string then use delete model option to delete string, 3rd method use Hide/Delete from graphics to delete string.

Click the video below to play it. To view in fullscreen mode, first click the YouTube link at the bottom of the video to launch the video on the YouTube site. Then, click the fullscreen button (rightmost button at bottom of video).

(Please visit the site to view this video)

Problem Description: Can't find the download link for Bentley Subsurface Utility Engineering (SUE)

Solution: Subsurface Utility Engineering (SUE) inbuilt in MXRoad, InRoads & Geopak. To activate SUE, on the MicroStation menu go to Tools > Product Add-Ins > Activate Subsurface Utility Engineering.

For more information:  It requires a separate license from MXRoad, InRoads & Geopak therefore it will need to be activated before use. 

Overview

This video demonstrates how to create and project back of curb profiles in OpenRoads

Support Video Clip

Recorded in 1024 x 768 resolution. 

(Please visit the site to view this video)

See Also

Product TechNotes and FAQs

InRoads Product TechNotes FAQs And Support Video Clips

GEOPAK Support Clips, TechNotes & FAQs

MX TechNotes And FAQs

External Links

Bentley Technical Support KnowledgeBase

Bentley LEARN Server

Comments or Corrections?

Bentley's Technical Support Group requests that you please confine any comments you have on this Wiki entry to this "Comments or Corrections?" section. THANK YOU!

This video demonstrates how to download latest Autodesk REALDWG.

Click the video below to play it. To view in fullscreen mode, first click the YouTube link at the bottom of the video to launch the video on the YouTube site. Then, click the fullscreen button (rightmost button at bottom of video).

(Please visit the site to view this video)

Question:

When mapping point within the Edit Transition command, I use the Window Area command to close in on my point.  However, when I select the Window Area command, I lose my dynamic link from my original point. 

Solution:

After selecting your point to map, use the scroll wheel on your mouse to zoom in and out, this will allow you to zoom in to your desired point.

This video demonstrates how to create a reverse spiral for a solution in existing geometry between circular arcs using the Define Spiral command.   This command is also used to define spirals between arcs and tangents, but this video will focus on a reverse spiral solution.

Click the video below to play it. To view in fullscreen mode, first click the YouTube link at the bottom of the video to launch the video on the YouTube site. Then, click the fullscreen button (rightmost button at bottom of video).

 Recorded in 1280 X 720 resolution. 

(Please visit the site to view this video)