Quantcast
Channel: GEOPAK | InRoads | MX | OpenRoads Wiki
Viewing all 1020 articles
Browse latest View live
↧

Creating UK Storm Data

July 8, 2016, 2:25 am
$
0
0
Revision 1 posted to GEOPAK | InRoads | MX | OpenRoads Wiki by Jonathan Smith on 7/8/2016 4:25:46 AM

Product(s):InRoads, MX, GEOPAK
Version(s):08.11.09.845+
Area: Subsurface Utilities

This video demonstrates how to create UK storm data for peak flow and simulations, in Subsurface Utilities.

Click the video below to play it. To view in fullscreen mode, first click the YouTube link at the bottom of the video to launch the video on the YouTube site. Then, click the fullscreen button (rightmost button at bottom of video).

 Recorded in 1280 X 720 resolution. 

(Please visit the site to view this video)

 

Tags: subsurface utilities, OpenRoads, SUDA
↧
Search

Video: OpenRoads ConceptStation - Place and Edit Ramps

July 11, 2016, 3:31 pm
$
0
0
Revision 2 posted to GEOPAK | InRoads | MX | OpenRoads Wiki by Marie-Claude Dubé on 7/11/2016 5:31:57 PM

Product(s):OpenRoads ConceptStation
Version(s):10.00.01.09+
Area: ConceptStation

This video demonstrates how to place and edit ramps in OpenRoads ConceptStation.

No audio.  Additional information on ConceptStation located here: https://www.bentley.com/en/products/product-line/civil-design-software/openroads-conceptstation

Click the video below to play it. To view in fullscreen mode, first click the YouTube link at the bottom of the video to launch the video on the YouTube site. Then, click the fullscreen button (rightmost button at bottom of video).

 Recorded in 1280 X 720 resolution. 

(Please visit the site to view this video)

 

↧
↧

.NET Errors while using OpenRoads

July 14, 2016, 12:59 pm
$
0
0
Current Revision posted to GEOPAK | InRoads | MX | OpenRoads Wiki by Nico Roman on 7/14/2016 2:59:55 PM

Product(s):InRoads, MX, GEOPAK
Version(s):08.11.09+
Area: Troubleshooting
Original Author:Jacquelyn Pettus, Bentley Technical Support Group

There are many reasons why you could get a .net error.

If you consistently see this error often, you might benefit from adjusting your windows memory settings.

This video demonstrates the process for adjusting those settings.

Also, check out this link with other tips from Microsoft

https://support.microsoft.com/en-us/help/15055/windows-7-optimize-windows-better-performance#1TC=windows-7

Click the video below to play it. To view in fullscreen mode, first click the YouTube link at the bottom of the video to launch the video on the YouTube site. Then, click the fullscreen button (rightmost button at bottom of video).

 Recorded in 1024 x 768 resolution. 

(Please visit the site to view this video)

 

Tags: .NET, OpenRoads
↧

Video: How to add elevations to a 2d element in Microstation

July 15, 2016, 12:55 pm
$
0
0
Current Revision posted to GEOPAK | InRoads | MX | OpenRoads Wiki by Nico Roman on 7/15/2016 2:55:02 PM

Product(s):InRoads, MX, GEOPAK
Version(s):08.11.09+
Area: Terrain Model
Original Author:Bentley Technical Support Group

This video demonstrates How to add elevations to a 2d element in Microstation.

Click the video below to play it. To view in fullscreen mode, first click the YouTube link at the bottom of the video to launch the video on the YouTube site. Then, click the fullscreen button (rightmost button at bottom of video).

 Recorded in 1280 X 720 resolution. 

(Please visit the site to view this video)

 

Tags: 2d elements convert add elevations
↧

Can GEOPAK SS2/SS3 be installed on the same machine as GEOPAK SS4?

July 19, 2016, 4:41 pm
$
0
0
Revision 2 posted to GEOPAK | InRoads | MX | OpenRoads Wiki by Kevin McDonald on 7/19/2016 6:41:04 PM

Product(s):GEOPAK
Version(s):08.11.09+
Area: Basic Settings
Original Author:Bentley Technical Support Group

 

Question:

Can GEOPAK SS2 and SS4 be installed on the same machine?

Answer:

GEOPAK SS2 can be installed on the same machine as GEOPAK SS4 (or SS3) with the following recommendations:

  • Access the softwares using their respective icons (with either the "-wsLoad_GEOPAK_SS2=1" or "-wsLoad_GEOPAK_SS4=1" set).  If this switch had previously been set with a CFG file at the system level, it will have to be removed and set on the icons.
  • Use separate MicroStation preferences (username & projectname) while using GEOPAK SS2 & GEOPAK SS4.
  • Keep SS2 and SS4 datasets separate between the two versions.
  • In order to run certain VBA based commands, it may be necessary to re-run the 'geopakcom' file in the version of software you are running. For example, before running an SS2 VBA command, execute the "geopakcom.exe" file  located in the "C:\Program Files (x86)\Bentley\GEOPAK\V8.11\bin" folder. Then, when switching to run a VBA command in SS4, run the "geopakcom.exe" file in the "C:\Program Files (x86)\Bentley\GEOPAK\GEOPAK (SELECTseries 4)\bin" folder.  More information on registering the geopakcom.dll can be found here:

NOTE: GEOPAK SS3 and SS4 can not be installed at the same time.

 

↧
↧

Creating a Feature Definition to Model a Pipe End

July 20, 2016, 5:11 am
$
0
0
Current Revision posted to GEOPAK | InRoads | MX | OpenRoads Wiki by Jonathan Smith on 7/20/2016 7:11:56 AM

Product(s):InRoads, MX, GEOPAK
Version(s):08.11.09.845+
Area: Subsurface Utilities

This video demonstrates how to create a feature definition to model a pipe end.

Click the video below to play it. To view in fullscreen mode, first click the YouTube link at the bottom of the video to launch the video on the YouTube site. Then, click the fullscreen button (rightmost button at bottom of video).

 Recorded in 1280 X 720 resolution. 

(Please visit the site to view this video)

 

Tags: Subsurface Utilities SUDA OpenRoads
↧

Make input Files from a GPK

July 21, 2016, 12:52 pm
$
0
0
Current Revision posted to GEOPAK | InRoads | MX | OpenRoads Wiki by Nico Roman on 7/21/2016 2:52:26 PM

  
 Applies To 
  
 Product(s):GEOPAK Civil Engineering Suite, PowerGEOPAK
 Version(s):ALL
 Environment: N/A
 Area: COORDINATE GEOMETRY
 Subarea: Make Input file
 Original Author:Bentley Technical Support Group
  

 

 

 

 

 

 

 

 

Overview
 
If you need to create an input file from a gpk, please watch the video below.
the command used is:
 
MAKE INPUT FILE nameXXX.iOC ALL
 
name is the name of the input file with xxx as the job number for the new gpk (where you will read the new input)
OC is the operator code you log in cogo with.
 
Note: file will be created in the working directory of the cogo input file directory found in the Geopak preferences.
 
 
Support Video Clip
 (Please visit the site to view this video)
Tags: Input, File, gpk, cogo
↧

Video: Civil Cells Edge of Pavement Masking

July 21, 2016, 2:55 pm
$
0
0
Current Revision posted to GEOPAK | InRoads | MX | OpenRoads Wiki by Jacquelyn Pettus on 7/21/2016 4:55:04 PM

Product(s):InRoads, MX, GEOPAK
Version(s):08.11.09+
Area: Civil Cells

This video demonstrates how to mask edge of pavement features on the the mainline corridor when placing a civil cell for an intersection.

Click the video below to play it. To view in fullscreen mode, first click the YouTube link at the bottom of the video to launch the video on the YouTube site. Then, click the fullscreen button (rightmost button at bottom of video).

 Recorded in 1280 X 720 resolution. 

(Please visit the site to view this video)

 

↧
Search

Civil Cells (OpenRoads)

July 21, 2016, 2:55 pm
$
0
0
↧
↧

Video: Force a Smooth Transition Between a Corridor and a Civil Cell

July 21, 2016, 6:46 pm
$
0
0
Current Revision posted to GEOPAK | InRoads | MX | OpenRoads Wiki by Jacquelyn Pettus on 7/21/2016 8:46:34 PM

Product(s):InRoads, MX, GEOPAK
Version(s):08.11.09+
Area: Civil Cells

This video demonstrates how to force a smooth transition between a mainline and a civil cell.

Click the video below to play it. To view in fullscreen mode, first click the YouTube link at the bottom of the video to launch the video on the YouTube site. Then, click the fullscreen button (rightmost button at bottom of video).

 Recorded in 1280 X 720 resolution. 

(Please visit the site to view this video)

 

↧

Error Message Installing SS3/SS4 Civil Product: "A supported version of MicroStation must be installed..."

July 28, 2016, 5:00 pm
$
0
0
Current Revision posted to GEOPAK | InRoads | MX | OpenRoads Wiki by Erik Mendoza on 7/28/2016 7:00:45 PM

Product(s):InRoads, MX, GEOPAK
Version(s):08.11.09+
Area: Basic Settings
Original Author:Jacquelyn Pettus, Bentley Technical Support Group

 

Problem:

The following error message is returned when attempting to install InRoads/GEOPAK/MX SS3 or SS4 refresh:  "A supported version of MicroStation must be installed before continuing this installation. Please read the <Product Name> requirements for this version."

Solution:

Please make sure that you have the correct version of MicroStation installed for the civil product you are attempting to install.  The required platform version is listed below:

Civil Product VersionMicroStation Version
08.11.09.49308.11.09.397+
08.11.07.61508.11.09.459+
08.11.09.67408.11.09.578+
08.11.09.72208.11.09.608+
08.11.09.78908.11.09.655+
08.11.09.84508.11.09.714+

These MicroStation versions can be downloaded from our Software Fulfillment website.  You will find them listed as a prerequisite for the civil products.

 

↧

Video: Corridor Processing Optimization Tips and Techniques

August 1, 2016, 5:13 pm
$
0
0
Revision 1 posted to GEOPAK | InRoads | MX | OpenRoads Wiki by Jacquelyn Pettus on 8/1/2016 7:13:02 PM

Product(s):InRoads, MX, GEOPAK
Version(s):08.11.09+
Area: Corridor Modeling
Date:  August 1, 2016

Due to the enhanced functionality of Bentley OpenRoads, when working with large and/or complex data, users may experience performance issues when processing corridor data. To address this, OpenRoads has several built in tools and settings which will optimize corridor processing. We have also gathered suggestions from a variety of engineers, designers, and developers which have been proven to increase processing speeds.

The PowerPoint presentation, video, and supplemental files contained in the wiki will provide information on various techniques that will greatly enhance the speed at with a corridor is processed.

Click the video below to play it. To view in fullscreen mode, first click the YouTube link at the bottom of the video to launch the video on the YouTube site. Then, click the fullscreen button (rightmost button at bottom of video).

 Recorded in 1280 X 720 resolution. 

(Please visit the site to view this video)

 

↧

Video: Export Alignment Points to Cogo

August 2, 2016, 10:56 am
$
0
0
Current Revision posted to GEOPAK | InRoads | MX | OpenRoads Wiki by Sanders Thomas on 8/2/2016 12:56:48 PM

Product(s):InRoads, MX, GEOPAK
Version(s):08.11.09+
Area: Geometry
Original Author:Sanders Thomas, Bentley Technical Support Group

This video demonstrates how to export Alignment points to the Cogo Buffer.

Click the video below to play it. To view in fullscreen mode, first click the YouTube link at the bottom of the video to launch the video on the YouTube site. Then, click the fullscreen button (rightmost button at bottom of video).

 Recorded in 1280 X 720 resolution. 

(Please visit the site to view this video)

 

Tags: Geometry, cogo points
↧
↧

Corridor Modeling & Cross Sections (OpenRoads)

August 2, 2016, 11:40 am
$
0
0
Current Revision posted to GEOPAK | InRoads | MX | OpenRoads Wiki by Jacquelyn Pettus on 8/2/2016 1:40:26 PM

The following resources are provided as a reference by Bentley's Technical Support Group. 

 

Corridor Creation & Manipulation

Video Clips

TechNotes

  • Coming Soon

 

Templates

Video Clips

TechNotes

 

Superelevation

Video Clips

TechNotes

 

Cross Sections & End Area Volumes

Video Clips

TechNotes

  • Coming Soon

 

↧

Road and Site Design - Wikis

August 4, 2016, 12:55 pm
↧
Search

Why am I Pulling a License for Subsurface Utilities Design and Analysis (SUDA)?

August 4, 2016, 12:59 pm
$
0
0
Current Revision posted to GEOPAK | InRoads | MX | OpenRoads Wiki by Kevin McDonald on 8/4/2016 2:59:21 PM

Product(s):InRoads/MX/GEOPAK
Version(s):08.11.09.845+
Area: Subsurface Utilities

 

Question:

When I launch my civil product, why do I see that I have activated Subsurface Utilities Design and Analysis?

Additionally, I see that in my license log I have Product ID 2174 active.

Answer:

Product ID 2174 is the Subsurface Utilities Design and Analysis license. When installed, Subsurface Utilities Design and Analysis functionality loads when OpenRoads starts. This product ID represents the 100 inlets level of StormCAD and is included at no additional fee with most OpenRoads packages.

It is possible that you might see Product ID 2174 listed multiple times. This is a known issue that, while it might be a bit confusing, does not affect your license fees.

Bentley Subsurface Utility Engineering (SUE) is a separate part of SUDA with Product ID 2335. It will appear only when you activate Bentley SUE from the tools menu. Note that the SUE Product ID is shown in addition to the StormCAD for OpenRoads ID.

If you activate one of the advanced hydraulic design products then you will see one of the following Product IDs alongside the 2174 ID. All of these are subject to additional license fees.

  • 1246 – StormCAD Unlimited Inlets
  • 1207 – CivilStorm
  • 1243 – SewerCAD
  • 1244 – SewerGEMS

 

↧

Which Products Include Subsurface Utilities Design and Analysis At No Additional Fee?

August 4, 2016, 1:09 pm
$
0
0
Current Revision posted to GEOPAK | InRoads | MX | OpenRoads Wiki by Kevin McDonald on 8/4/2016 3:09:47 PM

Product(s):InRoads, MX, GEOPAK
Version(s):08.11.09.845+
Area: Subsurface Utilities

 

Question:

Which of the OpenRoads products include Subsurface Utilities Design and Analysis at no extra fee?

Answer:

The Bentley Subsurface Utility Design and Analysis (SUDA) tools that are included in most OpenRoads packages include the "StormCAD 100 Inlets" functionality at no extra charge. It is included for all packages of GEOPAK, InRoads, or MX which contained a drainage design product in SS3 or previous versions.

With the exception of PowerSurvey, products which do not include Subsurface Utility Design and Analysis free of charge can activate it using StormCAD licenses; however, the minimum level of hydraulic design capability is StormCAD Unlimited.  Usage will be charged against a StormCAD license.  If you do not own a StormCAD license, overages will accrue.

The following table identifies which products include and which products do not include SUDA functionality with "StormCAD 100 Inlets" at no extra charge:

Product NameIncludes SUDA at No Additional Cost?
InRoads Site SuiteYes
InRoads SiteNo
InRoads SuiteYes
InRoads SurveyNo

InRoads

No
GEOPAK Civil Engineering SuiteYes
MXROAD SuiteYes
MXPROFESSIONALYes
Rail Track SuiteYes
Rail TrackNo

Power GEOPAK

Yes

Power InRoads

Yes
Power Rail TrackYes
PowerCivil for [Country]Yes
PowerCivil for North AmericaYes
PowerSurvey*No
MX BaseNo
MX CompactNo
MX GrondWerkNo
MX DrawNo

* None of the Subsurface Utility Design and Analysis (SUDA) tools are delivered with this product.

↧
↧

Video: OpenRoads ConcepStation - Importing a Roadway Sign

August 4, 2016, 1:20 pm
$
0
0
Revision 1 posted to GEOPAK | InRoads | MX | OpenRoads Wiki by Kevin McDonald on 8/4/2016 3:20:02 PM

Product(s):OpenRoads ConceptStation
Version(s):10.00.03.15+
Area: ConceptStation

This video demonstrates how to import a roadway sign, or other 3D roadway fixtures into OpenRoads ConceptStation.

No audio.  Additional information on ConceptStation located here: https://www.bentley.com/en/products/product-line/civil-design-software/openroads-conceptstation

Click the video below to play it. To view in fullscreen mode, first click the YouTube link at the bottom of the video to launch the video on the YouTube site. Then, click the fullscreen button (rightmost button at bottom of video).

 

(Please visit the site to view this video)

 

↧

OpenRoads ConceptStation Support Clips, TechNotes & FAQs

August 4, 2016, 1:21 pm
$
0
0
↧

Video: Enable Trenching

August 4, 2016, 2:33 pm
$
0
0
Current Revision posted to GEOPAK | InRoads | MX | OpenRoads Wiki by Chris Key on 8/4/2016 4:33:52 PM

Product(s):InRoads, MX, GEOPAK
Version(s):08.11.09+
Area: Subsurface Utility Engineering
Original Author:Bentley Technical Support Group

This video will demonstrate the process to enable trenching for conduit structures through the Element Information.  Once a conduit is placed, a Profile model must be opened to create a 3D Linear Element for which the trenching can be applied.  This allows the Trenching Option be become available through the Element Properties on the conduit structure.

Click the video below to play it. To view in fullscreen mode, first click the YouTube link at the bottom of the video to launch the video on the YouTube site. Then, click the fullscreen button (rightmost button at bottom of video).

 Recorded in 1280 X 720 resolution. 

(Please visit the site to view this video)

 

↧
Viewing all 1020 articles
Browse latest View live
Search
<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>